2 GETTING STARTED
This User Manual covers the basic operation of the Simoco SDP660 Digital Portable
radio.
The radio is software programmable and can be customised to the operational
requirements of a customer’s specific needs. Simoco representatives can help in
programming the radio facilities to meet a customer’s present and future
requirements.
Users should check with their Simoco dealer or system administrator about the
features programmed into the radio and specifically about:
• Whether any preset conventional channels are programmed into the radio?
• Which buttons have been programmed to access other features?
• The optional accessories that may be required?
2.1. PREPARING THE RADIO FOR USE
2.1.1. Charging the Battery
WARNING
LITHIUM BATTERIES. THIS EQUIPMENT USES LITHIUM ION
BATTERIES. REFER TO THE PERSONAL SAFETY PAGES.
Your radio is powered by a 2200 mAh Lithium Ion battery. To avoid damage and
comply with warranty terms, the battery should be charged with a Simoco Standard
Battery charger.
For best performance, new batteries should be charged for 5 hours before initial use.
2.1.2. Procedure
This charging procedure assumes that the PAR-600CRG1 Single Rapid Charger is used.
For full details on this charger, please refer to TNM-U-E-0118, PAR-600CRG1 Single
Rapid Charger – SDP650/660 Instructional Manual.
1. Connect the AC power adapter to an AC mains supply and to the socket on the
back of the charger.
2. Switch on the mains power. The Red LED on the charger will flash briefly. The
charger is now in standby mode.
3. Switch the radio off.
Doc Number:
TNM-U-E-0114 ISSUE 1.4
Page
30