2. On the audio accessory/programming cable, locate the tab lug of the connector
into either the top or bottom tab hole on the side of the radio as required see
Figure 4.
3. Tighten the screw to secure the audio accessory/programming cable to the
radio.
Figure 4: Fitting Audio Accessory/Programming Cable.
2.2. CONFIGURATION
Before the SDP660 radio can be used it must be configured using the Field Personality
Programmer (FPP). The configuration process loads the customised channels,
signalling and user options so that the radio will operate with the user’s system.
Doc Number:
TNM-U-E-0114 ISSUE 1.4
Page
33