12
USING THE SETUP MENU
(MODEL 119318C)
1. Setting the Date and Time
Press
•
Setup
, then select SET by pressing
Ok
.
The display reads “SET DATE”. Press
•
Ok
.
Set the Month with the
•
Up/Down
buttons, then press
Ok
to
confirm.
Set the Day with the
•
Up/Down
buttons, then press
Ok
to confirm.
Set the Year
•
(last 2 digits only)
with the
Up/Down
buttons, then press
Ok
to confirm.
The display reads “SET TIME”. Press
•
Ok
.
Set the Hour (24 hr. format) with the
•
Up/Down
buttons, then press
Ok
to confirm.
Set the Minute with the
•
Up/Down
buttons, then press
Ok
to
confirm.
2. Setting the Trigger Delay Time (Interval)
After you’ve set the time and pressed
Ok
, the display will read “DELAY”
(you may also enter the Setup menu and press
Down
until you get to
“DELAY”). This is the setting for the trigger delay time or interval, which
allows you to set the period in minutes and seconds that the camera will
“sleep” before accepting a new trigger from the PIR sensor. No photos
or videos will be taken during this interval, even if a trigger event is
detected.
The trigger delay can be set anywhere from 5 seconds to 10 minutes (the
default is 10 seconds). Shorter times will produce more photos, longer
times fewer photos. If you find you are getting too many photos of the
same animal that are very similar, try a longer trigger interval setting.
To change the trigger delay time:
Press
•
Ok
, then use the
Up/Down
buttons to set the minutes (0-10
min). Press
Ok
to confirm your setting.
Next, use the
•
Up/Down
buttons to set the seconds (5-59 sec). Press
Ok
to confirm your setting.
Summary of Contents for 119318C
Page 2: ......
