13
3. Setting the Video Recording Time
After you’ve set the trigger delay and pressed
Ok
, the display will read
“REC TIME” (you may also enter the Setup menu and press
Down
until you
get to “REC TIME”). This allows you to set the length in seconds per video
clip recorded when the camera is triggered (the default is 15 seconds). As
this setting only affects video recordings, the setting only matters when
the image capture mode slide switch is in the
Mov
(movie) position.
To change the video recording time:
Press
•
Ok
, then use the
Up/Down
buttons to set the seconds per
video clip (5-60 seconds). Press
Ok
to confirm your setting.
4. Setting the Image Size (Resolution)
After you’ve set the video recording time and pressed
Ok
, the display will
read “IMG SIZE” (you may also enter the Setup menu and press
Down
until
you get to “IMG SIZE”). This allows you to set the still photo image size
(resolution in pixels). Higher resolution provides higher quality photos,
lower resolution allows you to store more photos on the SD card. The
default is 5MP (megapixels), a good compromise of quality vs file size. As
this setting only affects still photos (single or multiple), the setting does
not matter if the front panel image capture mode switch is set to the
Mov
(movie) position, since the camera will only capture videos.
To change the still photo image size (resolution):
Press
•
Ok
, then use the
Up/Down
buttons to select 3MP, 5MP or 7MP
image size (resolution of 3, 5, or 7 megapixels). Press
Ok
to confirm
your setting.
5. Formatting the SD Card
After you’ve set the image size and pressed
Ok
, the display will read
“FORMAT SD CARD” (you may also enter the Setup menu and press
Down
until you get to “FORMAT SD CARD”). This allows you to format the
inserted SD card. This will delete all files from your card, so it is useful
to quickly prepare a previously used card to store new photos or videos
taken by the trail camera. Of course, you should be careful, since it erases
USING THE SETUP MENU
(MODEL 119318C)
Summary of Contents for 119318C
Page 2: ......
