Simex SUR-49B, User Manual

Page: 61 / 64

User manual - METER SUR-49B
Parameter Description Default value User's value
Desc.
page
Hi r Extension of the top of the nominal output range 5.0 (%) 36
AL Current output value on critical exception 22.1 (mA) 37
Active voltage output configuration (“OUtP” menu)
Omod Active voltage output mode
„0-10” (V)
35
OUtL Display value for 0 V, 1 V or 2 V voltage output 0.0 36
OUtH Display value for 5 V or 10 V voltage output 100.0 36
Lo r Extension of the bottom of the nominal output
range
5.0 (%)
36
Hi r Extension of the top of the nominal output range 5.0 (%) 36
AL Voltage output value on critical exception 11.0 (V) 37
Options connected with the bargraph (“bAr” menu)
tYPE Display mode of the bargraph „LinE” 37
FCoL Colours of the bargraphs „g r” 37
Pr1P Markers of the thresholds of relays R1 „1St” 38
Pr2P Markers of the thresholds of relays R2 „1St” 38
Pr3P Markers of the thresholds of relays R3 „oFF” 38
Pr4P Markers of the thresholds of relays R4 „oFF” 38
P1AL Critical situation definition for relay R1 „noC” 38
P2AL Critical situation definition for relay R2 „noC” 38
P3AL Critical situation definition for relay R3 „noC” 38
P4AL Critical situation definition for relay R4 „noC” 38
Lo C Measurement value appropriate to 0% on the
bargraph
0
38
Hi C Measurement value appropriate to 1000% on the
bargraph
100.0
38
Display parameters
bri Display brightness bri6 38
Configuration of peaks detection function (“HOLd” menu)
modE Kind of detected changes norm 39
PEA Minimum detected change 0.0 39
timE Maximum time of peak displaying 0.0 39
HdiS The type of displayed value HOLd 39
H r1 Source of relay R1, and LED R1 control rEAL 39
H r2 Source of relay R2, and LED R2 control rEAL 39
H r3 Source of relay R3, and LED R3 control rEAL 39
61