User manual - METER SRT-457
4.4.
MAINTENANCE
The unit does not have any internal replaceable or adjustable components available to
the user. Pay attention to the ambient temperature in the room where the unit is operating.
Excessively high temperatures cause faster ageing of the internal components and shorten the
fault-free time of the unit's operation.
In cases where the unit gets dirty do not clean with solvents. For cleaning use warm water with
small amount of detergent or in the case of more significant contamination ethyl or isopropyl
alcohol.
Using any other agents can cause permanent damage to the housing.
Product marked with this symbol should not be placed in municipal waste. Please
check local regulations for disposal of electronic products.
5.
FRONT PANEL DESCRIPTION
Symbols and functions of push-buttons:
Symbol used in the manual:
[ESC/MENU]
Functions:
Enter to main menu ( press and hold by at least 2 sec.)
Exit the current level and Enter to previous menu (or measure mode)
Cancel the changes made in parameter being edited
Symbol used in the manual:
[ENTER]
Functions
:
Start to edit the parameter
Enter to the sub-menu,
Confirmation of changes made in parameter being edited
Symbol used in the manual:
[^] [v]
Functions
:
Change of the present menu,
Modification of the parameter value,
Change of the display mode.
12
!
MENU
ESC
ENTER
MENU
ESC
ENTER
R3
R4
R1
R2
infrared
receiver
Thresholds exceeding
LED indicators (
R
)
display
programming
pushbuttons
