Simex SRP-N118, User Manual

Page: 50 / 52

User manual - METER SRP-N118
Parameter Description Default value User's value
Desc.
page
Hi r Extension of the top of the nominal input range 5.0 (%) 29
Display parameters
bri Display brightness bri6 30
Configuration of peaks detection function (“HOLd” menu)
modE Kind of detected changes norm 30
PEA Minimum detected change 0.0 30
timE Maximum time of peak displaying 0.0 30
HdiS The type of displayed value HOLd 30
H r1 Source of relay R1, and LED R1 control rEAL 30
H r2 Source of relay R2, and LED R2 control rEAL 30
Settings of access to the configuration parameters (“SECu” menu)
A r1
Permission to changes of relay R1 threshold
without of the user password knowledge
on
31
A r2
Permission to changes of relay R2 threshold
without of the user password knowledge
on
31
RS 485 interface configuration (menu “rS”)
Addr Device address 0 31
bAud Baud rate 9.6 31
mbAc Permission to changes of configuration registers on 31
mbtO Maximum delay between received messages 0 31
rESP Additional delay of answer transmission Std 31
Configuration of numerical parameters edition
Edit Numerical parameters edit mode dig 32
50