Simex SPP-N118, User Manual

Page: 58 / 60

User manual for - FLOW METER SPP-N118
Parameter Description Default value User's value
Desc.
page
droP
Measured value change causing of temporal
filtering deactivation
10.0 (%) 35
Display parameters
briGHt Display brightness
„bri 6
”
35
Configuration of peaks detection function (“HOLd” menu)
modE Kind of detected changes
„norm
” 36
PEA Minimum detected change 000.0 36
timE Maximum time of peak displaying
0.0 (sec.)
36
HdiS The type of displayed value „rEAL” 36
H r1 Source of relay R1, and LED R1 control „rEAL” 36
H r2 Source of relay R2, and LED R2 control „rEAL” 36
Settings of access to the configuration parameters (“SECU” menu)
Acc r1
Permission to changes of relay R1 threshold
without of the user password knowledge
on 36
Acc r2
Permission to changes of relay R2 threshold
without of the user password knowledge
on 36
RS 485 interface configuration (“rS-485” menu)
Addr Device address 0 37
bAud Baud rate
9600
(b./sec.)
37
mbAccE Permission to changes of configuration registers „on” 37
mbtimE Maximum delay between received messages 0 37
rESP Additional delay of answer transmission „Std” 37
Configuration of numerical parameters edition
Edit t Numerical parameters edit mode dig 38
58