Simex SPP-N118, User Manual

Page: 57 / 60

User manual for - FLOW METER SPP-N118
Parameter Description Default value User's value
Desc.
page
ALArmS Reaction for critical situation of relay „oFF” 29
Configuration of current flow display (“FLouu” menu)
I tyPE Input mode „4-20” 29
I CHAr Conversion characteristic mode LinEAr 29
Point
Decimal point position (precision of flow rate
displaying)
0.0 30
F unit
The unit of volume (Cubic measure) for flow rate
displaying
lit. 30
Ftunit The unit of time for flow rate displaying min 30
F or P Kind of value visible on the display „FL vAL” 30
Lo CAL Minimum displayed value (for nominal range) 000.0 30
Hi CAL Maximum displayed value (for nominal range) 100.0 30
CutoFF Cutoff threshold 1.0 (%) 31
Lo r Extension of the bottom of the nominal input range 5.0 (%) 32
Hi r Extension of the top of the nominal input range 5.0 (%) 32
Configuration of Batcher Counter reset and displaying mode (”bAtCH” menu)
b PrEc
Decimal point position ( precision of batcher
counter displaying)
0.0 33
b unit The unit of batcher counter displaying lit. 33
m CLr Manual zeroing of total flow counter oFF 33
A rES Batcher autoreset function oFF 33
Atunit Time unit of autoreset delay SEC 33
A dLy Batcher autoreset delay 0 33
Configuration of Total Flow Counter reset and displaying mode (”totAL” menu)
t PrEc
Decimal point position ( precision of total flow
counter displaying)
0.000 34
t unit The unit of total flow counter displaying lit. 34
m CLr Manual zeroing of total flow counter oFF 34
Programmable input configuration („Pr inP” menu)
Funct Programmable input function diSAbL 34
modE Active level/edge of programmable input HI 35
Power on initialization configuration
Init d Kind of value displayed after device power on FLo 35
Configuration of data filtration (”FiLtEr” menu)
vALUE Filtering ratio 0 35
57