Simex SLN-94, User Manual

Page: 26 / 44

User manual - COUNTER SLN-94
7.2.1. Numeric parameters
Numeric parameters constitute a series of digits that form a number in decimal format.
Entering a new parameter value consists of changing the values of selected digits within the
allowable range (using the
[^] keys).
7.2.2. Switch parameters (“LIST” type)
Switch parameters can be described as a sets of values (a lists) out of which only one of
the options available on the list can be selected for the given parameter. Options of switching
parameter are selected using
[^] keys.
Functions of buttons when editing numeric and switching parameters:
Change of digit value referred to particular
[^]
key (numerical values e.g.:
parameter
”Adr”
) or state of list-type parameters (e.g.: parameter
”bAu”
).
Press of
[ENTER/MENU] button causes of display a ”SEt ?” ask, which
allow user to make sure if change of the parameter value is correct. When
[ENTER/MENU] button is pressed again (while ”SEt ?” is displayed) the
new value of the parameter is stored in EEPROM memory. Next, present
parameter value is displayed and edition stops.
Pressing this button operator can cancel the changes done up to now (if they
were not approved by
[ENTER/MENU]
button after the
”SEt ?”
ask), and
device come back to menu.
7.3. MENU DESC RIPTION
“- - - -” Password checking. If password is set different from „ 0000 ”, than every enter to
main menu follows the entering of password. If entered password is correct first
menu position else warning ”
Err
” will be displayed, and unit returns to
measurement mode.
Due to problem with direct displaying of “ m ” letter, it is exchanged with special sign
“ “. Independently in user manual letter „ m ” is used to make it more readable
(example: “mod” ).
26
i
MENU
ENTER
ESC
RESET