User manual for - TIMER SLC-94
7.2.9.
“SEtcod” parameter
User password (4-digits number). If this parameter is set at value
“0000”
, user password
is turned off.
If the user do not remember his password, the access to the menu is possible
by the “one-use password”. To get this password please contact witch
Marketing Division. Please set new user password immediately after use of
the “one-use password” - see “SEtcod” parameter.
The “one-use password” can be used one time only, it is impossible to use it
again! The “one-use password” can be restored by Service Division only.
7.2.10.
”Edit t”
paramet
er
This parameter allows to change the edition mode of numerical parameters:
”dig”
- the change to “by digit” mode,
”Slid”
- slide change mode.
7.2.11.
”dEFS”
parameter
This setting allows to restore the factory settings of the device. To get the access to this
option special password is required: „5465”, next the device displays acknowledge question
„SEt?”
. Press
[ENTER]
to acknowledge the restoring of factory settings or
[ESC]
to cancel.
23
i
