User manual - CONTROLLER PUR-49D
“H r1” ÷
“H r4”
- relay/LED outputs ( R1÷R4) operation mode:
”rEAL”
- relay/LED operates depend on the current value,
”HOLd”
- relay/LED operates depend on the peak (drop) value.
”HOUt”
- current output operation mode:
”rEAL”
- current output operates depend on the current value,
”HOLd”
- current output operates depend on the peak (drop) value.
7.3.10.
”diSP” menu
T
he menu allows selection of the value displayed on the SV auxiliary display when the
current measurement value is displayed on the main PV display.
”no”
- nothing will appear on the SV display,
”rEL1”
- on the SV display appears
SEtP
of relay
R1
, and when it is in
rEL:Mode:In
or
rEL:Mode:Out
mode, both
SEtP
and
SEt2
values will alternate,
”rEL2”
- on the SV display appears
SEtP
of relay
R2
, and when it is in
rEL:Mode:In
or
rEL:Mode:Out
mode, both
SEtP
and
SEt2
values will alternate,
”rEL3”
- on the SV display appears
SEtP
of relay
R3
, and when it is in
rEL:Mode:In
or
rEL:Mode:Out
mode, both
SEtP
and
SEt2
values will alternate,
”rEL4”
- on the SV display appears
SEtP
of relay
R4
, and when it is in
rEL:Mode:In
or
rEL:Mode:Out
mode, both
SEtP
and
SEt2
values will alternate,
”Ctrl”
- the controller
SEtP
value appears on the SV display,
”OutP”
- on the SV display appears the value of the analog output, given in mA or V,
depending on the type of output.
7.3.11.
”SECu” menu
This menu contains presets connected with availability of other parameters.
“Scod”
- user password (4-digits number). If this parameter is set at value
“0000”
, user
password is turned off.
If the user do not remember his password, the access to the menu is possible
by the “one-use password”. To get this password please contact with
Marketing Division. “One-use password” can be used only one time, after that
it is destroyed. Entering this password causes in clearing of user password, it
means sets the user password to „0000”.
The “one-use password” can be used
ONE TIME ONLY
, it is impossible to use it
again! The “one-use password” can be restored by Service Division only.
“A r1 ÷ A r4”
- this option permits user (
”on”
) or prohibits (
”oFF”
) to modify the thresholds
of the relays/LEDs R1 ÷ R4 without knowledge about user password
49
i
