11
EN
5.3
Check and safety devices
RONDÒ/ESTELLE 4-5-6-7 ErP BE
appliances are equipped with
the following control and command devices:
– thermal safety thermostat 100°C
– heating thermostat (min 45°C - max 85°C)
– thermometer (0-120°C).
d
IT IS FORBIDDEN
To commission the appliance with safety devices
which do not work or which have been tampered with.
a
WARNING
Safety device may only be replaced by professional
qualified personnel using
Sime
original spare parts.
5.4
Identification
The
RONDÒ/ESTELLE 4-5-6-7 ErP BE
boilers can be identified by means of:
1 Packaging label:
located on the outside of the packaging, it includes the code and serial number of the boiler in addition to the
barcode.
2 Technical data plate:
it is located on the right-hand side of the boiler and includes the technical data, appliance performance data
and any other information required by law in the country where the appliance will be used.
2
1
Fig. 14
Technical Data Plate
NAME
SERIAL NUMBER
NOx CLASS
YEAR OF MANUFACTURE
WATER CONTENT IN BOILER
MAX HEAT INPUT
MAX HEAT OUTPUT (80-60°C)
MAX OPERATING PRESSURE
MAX OPERATING TEMPERATURE
ELECTRICAL PROTECTION DEGREE
ELECTRICAL SUPPLY
MAXIMUM ABSORBED POWER
APPLIANCE TYPE
NOx VALUE
CODE
N° PIN
Fig. 15
m
CAUTION
Tampering with, removing or failing to display the identification plate or carrying out any other operation which does not
allow safe identification of the product or which may hinder installation and maintenance operations.
