7
A E R O S T A T S E N T R Y
5 1 0 0 6 0 0 R e v . H
4. INSTALLATION
Electrical Requirements
The Sentry, P/N 4003000, requires 120VAC, 60 Hz for proper operation. The
unit must be grounded for safe operation. Plug the unit into a standard 3-terminal
grounded receptacle.’
The Sentry, P/N 4003143, requires 230VAC, 50 Hz for proper operation. The unit
must be grounded for safe operation. Plug the unit into a standard 2-terminal
double grounded receptacle.
To set the unit up in a bench stand configuration, secure the feet to the mounting
yoke:
1. Place the feet on a table top, with the feet bumpers down.
2. Align the holes at the ends of the yoke with the tapped holes in the feet and
secure with the 1/4-20 pan head screws and lockwashers provided.
3. Hold the Sentry in place, aligning the mounting hole in the yoke with the
threaded bump-out on the unit
4. Install the 3-wing lock knobs and washers on each side and tighten.
Figure 1
