MOON by Simaudio
To configure WiFi network without the use
of the MOON MiND application:
SETUP > NETWORK > CONFIG > WiFi PARAMETERS >
CONNECT
And then select which WiFi network from the list
to connect to. If the desired WiFi network does not
appear in the list, it can be entered manually:
SETUP > NETWORK > CONFIG > WiFi PARAMETERS >
MANUAL
Then the Security mode (WEP, WPA, WPA2) and password
(Security key) will be asked; select and enter appropriately.
Make sure to have on hand the network credentials before
starting the procedure.
How to configure for DHCP:
SETUP > NETWORK > CONFIG > NET PARAMETERS >
AUTOMATIC
Note: It is the default setting and for 99.9% of situation,
it is preferable to keep it automatic which use DHCP
protocol.
How to configure Static IP:
This mode should be reserved for network savvy expert:
SETUP > NETWORK > CONFIG > NET PARAMETERS
> MANUAL
Then the desired IP address will be asked.
Enter appropriately.
Then the desired Net Mask will be asked.
Enter appropriately.
Then the desired Gateway will be asked.
Enter appropriately.
Then the DNS will be asked. Enter appropriately.
Then the system asks if you are sure to apply
these settings to avoid any bad surprise.
To get detailed information on the connected
network:
SETUP > NETWORK > INFO
Multiroom Settings
Multiroom function allows to play the same music
synchronously on other MOON device equipped with
MiND 2 technology.
Using the MOON MiND Controller application, group
can be formed or cancelled at any time using the logo
within the app.
The MOON 390 has the capacity to play in group zone
not only the audio from the MiND 2 player, but also from
any local source connected to the MOON 390.
There is a setting to let user choose between highest
sound fidelity from the unit while playing in multi-zones
(ORIGINAL), or for the best synchronization of the different
zones playing the same signal (SYNCHRONIZED).
To set this preference:
SETUP > MULTIROOM > SYNCHRONIZED
or
SETUP > MULTIROOM > ORIGINAL
The SYNCHRONIZED setting means that all grouped
network players, including the master, are playing
the same synchronized digital signal.
The ORIGINAL setting means that the master unit
receiving the signal to be played in the group is actually
playing the original signal (even analog if the original
signal is analog) while the other in the group are playing
a digitized and time encoded signal.
Bluetooth
To pair the unit to a new Bluetooth device:
SETUP > BLUETOOTH > START PAIRING
Note: The Bluetooth feature of your smart device must
be enabled for pairing to work. Pairing mode is enabled
for 30 seconds only or until pairing is completed.
This procedure only needs to be performed once for each
smart device.
To disconnect a Bluetooth device form the unit:
SETUP > BLUETOOTH > DISCONNECT
MOON CD Special Feature
If you connect a MOON CD player (or MOON CD
transport) to the MOON 390 and connect the SimLink
TM
cable between the products, automatic input selection will
take place each time you press play on the player. Input
need to be set according to the real life connection to
work properly.
