09
USB Host:
For immediate playback of files
on a temporary drive using MiND Controller
mobile app. For the best performance and navigation
experience, files should be served over the network
using a UPnP server.
Note: Compatibility is not guaranteed with every brand
and model of USB drive, nor with every file system.
WiFi Antennas:
If you plan to use the wireless music
streaming feature (between your wireless router and
the MOON 390), you must install the included Wi-Fi
antennas on the back panel by screwing them into the
socket labelled “WIFI ANT”.
Network:
Ethernet connection (100Mbps) to
connect to a router. Highly recommended for best
music streaming performance (compared with WiFi
connection). The second Ethernet connection is
available to connect another device, such as NAS drive,
intelligent TV, or any other device requiring Ethernet
connection. Note: The MOON 390 do not bridge
its wireless connection to the wired connection. The
dual Ethernet connection acts as a wired LAN switch.
Communication Connections
12V Trigger:
Connect to 12V trigger input of
amplifier. It allows to turn connected amplifier on
and off following the MOON 390 status.
Simlink
TM
:
Connect to other MOON components
to provide various functions such as automatic source
selection and grouped Stanby mode. Always connect
Simlink output to Simlink input. No need to close
the loop, communication between components
is bi-directionnal.
The following chart summarizes which sample rates (from decoded PCM files & DSD files) will work
on each digital input:
OPTICAL
SPDIF
AES/EBU
USB
MiND via
Ethernet
MiND via
WiFi
Bluetooth
HDMI
(Optional)
PCM
44.1kHz
48kHz
88.2kHz
96kHz
176.4kHz
192kHz
352.8kHz
#
384kHz
#
DSD
64 (2.8224MHz)
128 (5.6448MHz)
#
256 (11.2896MHz)
#
Audio Compatibility
The MOON 390 is capable of processing a PCM or MQA digital signal at the following sampling rates: 44.1kHz, 48kHz,
88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz and 384kHz.
The MOON 390 is also capable of processing a DSD digital signal at any of the following data rates: DSD64 (2.82MHz),
DSD128 (5.64MHz) and DSD256 (11.28MHz).
Notes: # signals that might work with MiND via WiFi input, depending on your router and conditions, but is NOT
recommended as they may suffer from audible drop outs. / * ALAC file type limited to 96kHz / ** AIFF file type must be
uncompressed ONLY. / MQA is the same as PCM in the table above, without Bluetooth support.
