11
If an advanced setup is desired, then the gain, impedance,
capacitance and EQ curve can all be set manually, based
on the desired characteristics to best fit with the cartridge.
To set the gain of the phono input:
SETUP > INPUT > PHONO > CONFIG > ADVANCED>
GAIN > ‘choose the desired gain from the list’
To set the input impedance of the phono input:
SETUP > INPUT > PHONO > CONFIG > ADVANCED>
IMPEDANCE > ‘choose the desired value from the list’
To set the input capacitance of the phono input:
SETUP > INPUT > PHONO > CONFIG > ADVANCED>
CAPACITANCE > ‘choose the desired value from the list’
To set the desired EQ Curve:
SETUP > INPUT > PHONO > CONFIG > ADVANCED>
EQ CURVE > ‘choose the desired curve’.
Note: RIAA is the standard EQ curve for the vast majority
of LP records. IEC curve is the equivalent of RIAA with
an added anti-rumble feature, useful when significant
unmusical bass resonances appear within the system.
VARIABLE OUT
There are three pairs of analog outputs located on the rear
panel of the 390. By default, there are two sets (XLR and
RCA) of variable-volume outputs and one pair (RCA) of
fixed-volume outputs. To convert all the outputs to fixed
outputs:
SETUP > VARIABLE OUT > FIXED
Caution! The fixed volume level will be relatively high.
Before setting the 390 analog outputs to ‘fixed’, lower the
volume of the preamp or integrated amp to which the
390 is connected.
Selecting ‘Spk Off’ to use headphones will temporarily
reenable volume control for the Phones output.
Note: Volume commands are transmitted to the 390
when its volume control is enabled. When its output
volume is ‘fixed’, volume commands are relayed
via SimLink to the next MOON device.
HDMI (Optional)
If your unit includes the optional HDMI module,
you may configure its functionality to suit
your requirements.
To associate a specific HDMI video signal
with a different audio input:
SETUP > I NPUT > ‘Input you want to modify’ >
HDMI In > ‘Select the HDMI input you want to associate’
Default for this setting is called LAST. This means
that the last selected HDMI video signal is still passed
to the HDMI output.
To listen to a connected an HDMI source on the TV
while MOON 390 is put in Standby mode:
SETUP > HDMI > HDMI STBY > ‘Input you want to listen’
Note: ‘LAST INPUT’ means the last selected HDMI input
would still be sent to TV while in standby. ‘OFF’ means
no HDMI signal is sent to the output in Standby mode.
To enable HDMI CEC (Consumer Electronic
Control) features (Allows automatic turn on/turn
off, automatic input selection etc with other CEC-
compatible component):
SETUP > HDMI > HDMI CEC > ON
Note 1: The default setting is ARC ONLY which means
the CEC feature is disabled but allows HDMI ARC
(Audio Return Channel) to function.
Note 2: The setting ‘OFF’ not only disable CEC features,
it also disables HDMI ARC.
Network Settings
Please note it is not required to enter settings to use
the wired (Ethernet) connection.
To change the friendly name* of the MiND zone.
SETUP > NETWORK > MiND name > ‘type
the desired name’
*name as it appears in the MOON MiND app.
We recommend giving a meaningful name based
on the location (or zone) in which the unit is, such as living
room, listening room, etc.
The system asks if you are sure before you proceed,
to avoid any bad surprise.
