Sima MEKANO VENUS-125, Original User Manual

Page: 24 / 164

ENGLISH
INDEX
“EC” DECLARATION OF CONFORMITY ............................................................ 3
1. GENERAL INFORMATION............................................................................ 5
2. GENERAL DISCRIPTION OF THE MACHINE ................................................. 5
2.1 PICTOGRAMS ................................................................................................................ 6
2.2 TRANSPORTE................................................................................................................. 6
3. ASSEMBLING INSTRUCTIONS .................................................................... 6
3.1 MOUNTING THE SWITCH AND THE LEGS ........................................................................... 6
3.2 FILLING THE WATER TRAY............................................................................................... 7
4. ELECTRICAL PLUGGING AND ADJUSTING THE DISK ROTATION SENSE ...... 7
5. MOUNTING AND DISMOUNTING THE CUTTING DISK ................................. 7
5.1 MOUNTING/REPLACING THE CUTTING DISK....................................................................... 7
6. ELECTRICAL EQUIPMENT ........................................................................... 8
6.1 SINGLE-PHASE MACHINES .............................................................................................. 8
6.2 MAQUINAS CON MOTOR TRIFASICO. ................................................................................ 8
7. SAFETY RECOMMENDATIONS ..................................................................... 9
8. MACHINE STARTING-UP AND USING INSTRUCTIONS ................................ 9
8.1 POSITION OF THE MACHINE AND THE OPERATOR, CONNECTION AND DISCONNECTION .......... 9
8.2 ADJUSTING THE HEIGHT OF THE CUTTING HEAD.............................................................. 10
8.3 REALISING A STRAIGHT CUT ......................................................................................... 10
8.4 REALISING A DIAGONAL CUT......................................................................................... 10
8.5 REALISING A DIAGONAL CUT......................................................................................... 10
9. MAINTENANCE ......................................................................................... 10
9.1 SUBSTITUTING A DETERIORATED DISK........................................................................... 11
9.2 ALIGNING THE DISK..................................................................................................... 11
9.3 ADJUSTING THE CUTTING HEAD´S BEARINGS ................................................................. 11
9.4 ALIGNING THE DISK WITH THE CUTTING BRIDGE ............................................................ 12
10. SOLUTIONS TO MOST FREQUENT ANOMALIES ....................................... 13
11. TECNICAL CHARACTERISTICS ................................................................ 14
12. WARRANTY ............................................................................................ 14
13. SPARE PARTS ......................................................................................... 14
14. ENVIRONMENT PROTECTION ................................................................. 14
15 DECLARATIONS ON NOISE LEVEL............................................................ 15
16 DECLARATIONS ON MECHANIAL VIBRATIONS LEVEL.............................. 15
17. ELECTRICAL SCHEMES............................................................................ 16
WARRANTY CERTIFICATE ............................................................................ 20
- 4 -