ENG
10
10
9.2 BENDING THE HEAD TO CUT
• Place the piece to cut on the bench.
• Loosen the knob that blocks the rotation of the cutting unit.
• Grasp the handle and raise the cutting unit.
• Adjust the height of the suction tube and start cutting.
9.3 CUTTING SLOTS - CUTTING AT TWO PASSES
• Place the piece to cut on the bench.
• Loosen the knob that blocks the rotation of the cutting unit.
• Set the cutting unit to the desired height and tighten the knob to lock the cutting unit.
• Use the drive wheel or handle adapting them to the needs of the cut.
Rectangular
windows
2 Pass cut
35mm
1 Pass cut
22mm
22
35
