SIM2 XTV 4K INV
Installation: Quick User Guide
3
WARNING - Important Safety Instruction
1.
There are the only 455nm laser module in product. Other colors of light is produced
by the laser stimulate phosphor luminescence which is not included in the scope of the
standards IEC 60825-1:2014 (Third Edition) and EN 60825-1:2014.
2.
Class 2 laser product, do not stare into beam. The bright light may result in permanent
eye damage, when the projector is on.
3.
This projector has built-in laser module. Disassembly or modification is very dangerous
and should never be attempted.
4.
Do not open or disassemble the projector as this may cause damage by the exposure
of laser radiation. Any operation or adjustment not specifically instructed by the user's
guide creates the risk of hazardous laser radiation exposure.
5.
Without following the control, adjustment or operation procedure, may cause damage
by the exposure of laser radiation.
6.
Do not block any ventilation openings. To ensure reliable operation of the projector
and to protect from over heating, it is recommended to install the projector in a
location that does not block ventilation and provides necessary air flow.
7.
Do not use the projector near water or moisture. To reduce the risk of fire and/or
electric shock, do not expose the projector to rain or moisture.
8.
Do not install near heat sources such as radiators, heaters, stoves or any other
apparatus such as amplifiers that emits heat.
9.
Clean using only our cleaning kit accessory.
10.
Only use materials/attachments/accessories certified and specified by the
manufacturer and follow the safety and installation instructions provided for the
manufacturer.
11.
Do not use the unit if it has been physically damaged or abused. Physical
damage/abuse would be (but not limited to):
•
Unit has been dropped.
•
Power supply cord or plug has been damaged.
•
Liquid has been spilled on to the projector.
•
Projector has been exposed to rain or moisture.
•
Something has fallen in the projector or something is loose inside.
Do not attempt to service the unit yourself. Opening or removing covers may expose
you to dangerous voltages or other hazards.
12.
Do not let objects or liquids enter the projector. They may touch dangerous voltage
points and short out parts that could result in fire or electric shock.
13.
See projector enclosure for safety related markings.
14.
The unit should only be installed and repaired only by appropriate service personnel.
Adequate instructions for assembly, operation and maintenance, including clear
warnings concerning precautions to avoid possible exposure to laser and collateral
radiation in excess of the accessible emission limits in Class 2.