SIM2 XTV 4K INV
Installation: Quick User Guide
14
Adjusting the image
To regulate the bottom adjustment knobs, make sure to leave at least 12 cm (4.8
“)
of free
space underneath the unit.
The adjustments described below are intended to adapt the SIM2 XTV 4K INV to the
Customer’s installation in order to obtain the best geometry of
picture.
The adjustment can be done by turning one (or more) knobs; each adjustment has an effect
on a specific part.
Also, each regulation influences other parts of the image; therefore, some regulations
already done might require to be re-adjusted a second time.
Each unit is factory preset to obtain the requested diagonal picture size and these
adjustments are only to compensate some little mechanical tolerances of the installation.
In case of any problem, the mechanical factory presets can be “r
e-
called” by adjusting the
three knobs underneath the product and matching the references, as shown in the
drawings below.
Right side Left side
Rear side.