SIM2 XTV 4K INV
Installation: Quick User Guide
10
4
Installation
Important:
Installation procedures should be performed by a qualified AV system
specialist.
Location
When installing the SIM2 XTV 4K INV display, take the following considerations into account.
Installation Type
Select the installation type that best suits your needs:
•
front or rear projection
Orientation:
By default, the SIM2 XTV 4K INV
is configured for a Front installation (projector
installed upright and in front of the screen). If the projector is installed behind the screen
or inverted, you can use the image orientation function of the projector
.
Cooling:
Make sure that the planned location for the projector has adequate ventilation.
Check that room temperature is below 35° C and that the projector is away from heating
vents. SIM2xTV INV must be placed in a forced air flow rack design or furniture. DO NOT
mix for any reason hot air flow (exhaust) with cold air flow (intake). Ensure a minimum
cooling of 1250 BTU/h. Leave enough space around the unit for correct air.
Power Outlets:
Verify that the powers outlets are grounded and preferably shielded from
power surges and fluctuations. A UPS is optional. SIM2 XTV 4K INV
power supply operates
on any nominal line voltage between 100-240 V AC, 50-60 Hz.
Cables:
Check planned cable lengths for video and control cables and make sure these
lengths do not exceed specifications.
Ambient Light:
Avoid or minimize light sources directed at the screen to preserve the
quality of the projected image.
Mounting
The SIM2 XTV 4K INV projector has been design to be submit the EN60950/UL950 Safety
Norms with it's glass cabinet.
To determine where to position the projector, consider the size and shape of your screen,
the location of your power outlets, and the distance between the projector and the rest of
your equipment.
Screen or projection surface must be flat.
Position the SIM2 XTV 4K INV so that the rear crystal-glass is parallel to the projection
surface.