12
p
ro
c3
6 SWITChING ThE PROJECTOR ON AND OFF
WARNING: Connect the projector to a power supply with a
nominal voltage within the following values: 100-240 V AC,
50/60 hz. It must be earthed (Fig. 10).
GRAPHICS RGB
HV
S-VIDEO
AUDIO OUT
HDMI 1
REMOTE
2
S-VIDEO
MENU
ESC
INPUT
1
5
4
0
I
Power Switch:
Position I: On
Position 0: Off
Fused
Power Socket
Power Plug
Fig. 10
In position
I
the projector will initialise itself (red and green leds
on) and then goes into standby mode (red led on) (Fig. 11).
HDM
I 1
MENU
ESC
INPU
T
5
HDM
I 2
6
0
I
SWITCh ON FROM STANDBY
With the remote control: press one of the keys
1...9 or with 0.
With the keypad: press STANDBY button.
232)
GRAP
HICS RG
B
HV
S-VID
EO
AUDIO
OUT
HDM
I 1
REMO
TE
2
S-VID
EO
MENU
ESC
1
5
4
HDM
I 2
6
When the unit is switched on from standby the lamp switches
on; after a brief period of warming up, the image displays (blue
led on). The projected image comes from the input selected
when the unit was last switched off (Fig. 12).
If a very short time has passed since the unit was last switched
off, the lamp may not switch on beause it is too hot.
Just wait a few minutes for the lamp to cool down sufficiently.
Fig. 11
Fig. 12
