NERO1
User Guide
47
Auto Power Off (min)
Sets the countdown timer interval. The countdown timer will start, when there is no
signal being sent to the projector. The projector will automatically power off when
the countdown has finished (in minutes). The range is from 0 ÷ 180 minutes (0 is
equal to OFF, function not enabled).
Signal
•
Signal (VGA)
This menu is only avalaible and supported in Analog VGA (RGB) signal.
•
Frequency
Change the display data frequency to match the frequency of your
computer's graphic card. Use this function only if the image appears to
flicker vertically.
•
Phase
Synchronize the signal timing of the display with the graphic card. If the
image appears to be unstable or flickers, use this function to correct it.
•
H. Position
Press the
$
to move the image left.
Press the
%
to move the image right.
•
V. Position
Press the
$
to move the image down.
Press the
%
to move the image up.
•
Automatic
Automatically configures the signal (the Frequency and Phase items are
grayed out). If Automatic is disabled, the Frequency and Phase items will
appear for user to manually tune and save the settings.
