NERO1
User Guide
11
Custom Remotes
You can use your own IR remote control to control your NERO1 projector.
•
If you are using a remote control with learning capabilities, use the projector
remote control to teach the commands to your remote.
•
If you are using a programmable remote control, the setup software probably
allows importing of Pronto Hex codes. See
SIM2 NERO1 IR Control
for a list of all
the projector codes in Pronto Hex format, including a number of discrete codes
for:
•
Aspects
•
Memories
•
3D Controls (3D Mode and Input Formats)
Operation
The NERO1 projector has two IR receivers (
B
,
C
) one on the front of the unit and one
on the top. The operative range of the remote control is approximately 10 m (33 ft.).
Make sure that there is nothing obstructing the infrared beam between the remote
control and the IR receiver you are pointing to. You can point the remote control
towards the screen, as the IR beam is reflected by the screen towards front IR
receiver of the projector. In this case the effective range of the remote control may be
smaller than declared.
Item Description
B
Top IR receiver
C
Front IR receiver
B
C
