NERO1
User Guide
26
Input Menu
Press the menu button on the remote control and go to “SETUP” to enter into the
Input Source menu, or directly select the desired input by pressing the corresponding
button on the remote control (HDMI1, HDMI2, VGA, etc) or press the SOURCE button
on the back panel.
Use this option to enable/disable input source.
Press
!
to enter the sub menu, press
"
or
#
on the remote control to highlight the
input, and select which sources you require. Press
!
to finalize the selection. The
projector will only search for inputs that are enabled.
Press on the remote control to exit from the Input Source menu.
Each time an Input is changed an information window appears on the screen and
remains there until a valid signal is detected (this feature can be disabled in the
Setup
section (see “Information Hide
“ at page 46).
If no signal is detected on the selected input, a “No Source Found” message is
displayed.
