NERO1
User Guide
23
•
Switch on your 3D glasses. Refer to the instructions supplied with the glasses to
ensure correct operation.
•
The projector will automatically detect the 3D signal and you will be prompted to
wear your glasses via the OSD.
To Watch 3D Content via Satellite, Cable and Games Console
•
Switch on the NERO1 and all other relevant products such as Satellite receiver and
AV receiver and ensure the correct inputs have been selected.
•
Select the appropriate 3D channel.
•
If the projector displays two distorted images side by side or one on top of each
other, select the 3D menu by pressing the “3D Format” button on the remote
control (see “3D Format” at page 23).
•
Switch on your 3D glasses. Refer to the instructions supplied with the glasses to
ensure correct operation.
Important:
All 3D technologies currently available today filter out a large amount of
light. Therefore it is perfectly normal for the 3D image to be noticeably dimmer when
compared to the picture in 2D mode. Adjust the 3D picture and LED Brightness
settings accordingly for 3D viewing.
3D Menu
To view 3D content additional adjustments are required. With 3D content playing,
press
3D Format (
O
)
on the remote control to access the OSD
3D
menu.
3D Format
The NERO1 checks AVI infoframe data and input signal resolution in order to
determine the appropriate 3D format. When automatic detection of 3D format is not
possible, choose one of the following options:
