Sim2 Grand Cinema RTX 55H, User And Installation Manual

Page: 21 / 31

19
MEMORIES
The main parameters of the image may be saved in distinct
groups of values (known as ‘Memories’); these parameters can
subsequently be applied all together by way of a single com-
mand.
There are 3 distinct Memories (Memory 1, Memory 2, Memory
3) for each of the 25 signal types managed:
making a total of 75 different available Memories.
The image parameters that can be saved/recalled by the Memo-
ries management system are the following:
Image Picture
BRIGHTNESS ASPECT
CONTRAST COLOR TEMP. GAIN (R/G/B)
COLOR COLOR TEMP. GAIN OFFSET (R/G/B)
TINT COLOR TEMP.
SHARPNESS OVERSCAN
FILTER GAMMA
SHARPNESS MODE
VIDEO TYPE
NOISE REDUCTION
Some of these parameters may not be available for certain in-
puts or certain input signals, as indicated in Tables 4 and 5.
The menu page for the Memories management functions is
activated by pressing the
key on the remote control or the
key on the keypad (Fig.18).
F1
E
2005
ES
C
ME
NU
AU
TO
ESC
MENU
AUTO
Fig.18
The operations that can be performed on each memory se-
lected are described here below.
SAVE A MEMORY
To save the current values of the image parameters in Memory 1,
use the
and keys to move to line ‘1’ and then open the pull-
down menu by pressing the key (Fig.19) . Then select the
option ‘Save current settings’. To confirm that the operation has
been completed successfully, the message ‘Current settings
saved in Memory 1’ is displayed at the bottom of the screen and
the letter ‘S’ appears to the left of the memory name. The same
procedure is used to save parameters in Memories 2 and 3.
0 Auto
3 S MEMORIA 1
Memories
Save current settings
Save initial settings
Rename
2 I
1 S
Fig.19
RECALL A MEMORY
To recall a Memory, select the desired line and press
. The
parameters saved in the selected Memory will be applied to
the image displayed and a message will appear to confirm the
operation ‘Memory 1 recalled’. The Memory recalled will be
associated with the source and signal type, and will be auto-
matically recalled every time that particular source and signal
type combination is selected.
5 COMP/RGB(YCrCb 15KHz) 5 COMP/RGB(RGB 15KHz)
6 COMP/RGB(YCrCb 15KHz)
6 COMP/RGB(RGB 15KHz)
5 COMP/RGB(YCrCb 32KHz) 5 COMP/RGB(RGB 32KHz)
6 COMP/RGB(YCrCb)
6 COMP/RGB(RGB)
7 COMP/RGB(YCrCb 15KHz) 7 COMP/RGB(RGB 15KHz)
8 COMP/RGB(YCrCb 15KHz) 8 COMP/RGB(RGB 15KHz)
7 COMP/RGB(YCrCb) 7 COMP/RGB(RGB)
8 COMP/RGB(YCrCb)
8 COMP/RGB(RGB)
9 GRAPHICS RGB
11 DVI-D (RGB)
12 HDMI
1 VIDEO
2 VIDEO
10 GRAPHICS RGB
11 DVI-D (YCrCb)
3 S-VIDEO
4 S-VIDEO