12
Installing the Siren Units
A Transceiver can control up to 8 Sirens. It is recommended that the units be
installed on a flat surface in a prominent location.
To install the Siren in each location:
1. Choose a location for each one for the installation of each Siren units. Make sure
that there is Radio coverage to this location from the Transceiver.
Place the Siren Units high enough off the ground in order to make them
inaccessible to passers‐by and well within the wireless range of the cluster
Transceiver
2. Remove the two pivot screws that secure the Siren cover.
Figure 7: Siren Unit
3. Remove the Siren cover.
4. Place the unit on the installation surface and mark out the four screw holes.
