18
19
|
|
19
20
20
Power Injection Box installation
The connection between your new wheel and PC is handled through the Power
Injection Box (PIB). This will transfer signals and additional power to the wheel.
Installation is very straight forward. We do advise to have the connector for the
coiled cable (A4) oriented upwards along the profile. The bottom of the PIB is where
your DC power adapter (A5) and USB-A cable (A3) are connected.
After connecting all cables and making sure the wheel
functions as intended, we advise to secure all cables. Do
this in such a way they can’t be tripped on or accidentally
pulled from their sockets.
Only use the supplied DC power supply.
When experiencing intermittent signal loss, we suggest
using a powered USB hub.
Only connect ‘Grid’ or ‘Grid by Sim-Lab wheels’ or risk DAMAGE to your wheel or PC!
A8
A2
UPWARDS
A7
