12
|
12 20
Bite-point adjustment
Bite-point adjustment is available only in the
DUAL-CLUTCH mode
. If you are not
in this mode, please see the previous page how to switch to this mode. Also, it is
important that both paddles are calibrated before adjusting their behavior. Please see
Page 14 before following the steps on this page, if you have not calibrated your clutch
paddles already.
To adjust the bite-point,
Press and Hold
the ADJUST (A) button and the left clutch
paddle (LC)
fully
. Next, start by dialing in the bite-point roughly by using the Coarse
(C) adjustment knob, tweak using the Fine (F) adjustment knob.
The Coarse (C) adjustment adjusts in roughly 10% increments, while Fine (F) roughly
does 1% of adjustment. This way you can really dial in your clutches without
compromise.
To make it easier to adjust and know the (exact) percentage of the bite-point, there
is visual feedback (V) on the wheel itself. The RPM LEDs will show red (10% per LED)
while using the Coarse adjustment knob, green (1% per LED) while using the Fine
adjustment knob. You should also be able to see the changes update live, following
the steps on Page 9.
F
V
C
A
LC
