12
www.silverstarmobility.com
Backpacker MV
NUT
BOLT
Figure 6. Wheel Chock Installation
WHEEL CHOCK
ADJUSTMENT HOLES
Wheel Chock Installation
Your lift is supplied with two adjustable wheel chocks that
aid in centering your mobility device during loading.
See
figure 6
.
Follow these steps to install the wheel chocks:
1. Drive your mobility device onto the lift platform,
positioning it as near to the center as possible.
2. Position the wheel chocks on the platform.
Scooters
: Place a wheel chock in front of the front
wheel(s) and behind the rear wheels.
Power chairs
: Place a wheel chock in front of the
drive wheels and behind the rear casters.
3. Take note of the adjustment holes the wheel chocks
align with on the platform and remove the chocks.
NOTE: For larger scooters, the wheel chocks may
be positioned to the inside of each wheel.
4. Remove the mobility device from the lift platform.
5. Raise the platform high enough to be able to install
hardware from beneath it.
6. Place the wheel chocks onto the lift platform and
secure them with the supplied bolts and nuts.
NOTE: Make sure the mobility device is properly
secured with the Y-strap before operating the lift or
transporting the mobility device.
I I I . I N S T A L L A T I O N
