![background image](http://html1.mh-extra.com/html/silverline/h22160-006/h22160-006_service-manual_1273797013.webp)
13
3. Micromatch Connector Input Check
The multimeter DC voltage should be brought to the measurement stage when making these
measurements. The leg connections of the connector on the card are:
Figure 1
a. Switchboard Supply Input Check
This measurement is performed under energy.
15V should be seen on the display when the red probe
is in contact with leg 1 shown in Figure1 and the black
probe is in contact with leg 3 shown in Figure1.