EN - 16
Mode Descriptions
On/Off
Key lock
Plus
Function selection
Boost
Minus
Play/Pause
Thermostat
Temperature display
Mode
Time display
Pyrolytic cleaning
The control unit will switch off after 5
minutes if no function is selected or
changed.
The appliance is operated using touch
control sensors. The functions are
controlled by touching the sensor fields.
When you are using the controls, make
sure that you touch the sensor field
correctly. If your touch is too flat or too small
the sensors will not operate correctly.
The cooling fan will switch on automatically
in order to keep the surfaces of the
appliance cool. The fan will continue to run
until it automatically switches off, even after
the oven has been switched off.
Oven Function Selection
Touch the
ON/OFF
sensor for 2 seconds
to switch the control unit on. The oven will
enter “
WAIT
” mode. During this mode, you
will be able to select the desired cooking
functions, adjust the temperature, activate
the
BOOST
function, as well as adjust the
cooking time, end time, Minute Minder timer
and the time of day.
During “
WAIT
”
mode, the desired cooking
function can be selected by touching the
P
sensor button. Each touch on the
P
sensor
will change the oven function, as shown
below (some of these cooking functions
may not be present in your cooker model):
Lamp → Defrost → Turbo → Upper and
Lower → Upper and Lower with Fan → Grill
(with/without turnspit) → Double Grill (with/
without turnspit) → Double Grill with Fan
(with/without turnspit).
The operated heaters and accessories
related to the selected function will be
displayed.
When a cooking function is selected using
the
P
sensor, the previously selected
temperature value will show on the
Temperature display. This can be adjusted
using the
PLUS
and
MINUS
sensor buttons
on the side of the display. The temperature
can be adjusted within the range of 50°C to
275°C.
After the desired function has been
selected, and the temperature and time are
set, touch the
START/STOP
sensor to start
the oven function operation.
Adjusting the Time of Day
When the oven has been installed, the
time of day must be set according to the
following instructions.
Touch the
ON/OFF
sensor to switch the
oven on and enter “
WAIT
” mode. During
this mode, touch the
MODE
sensor button
until the time is selected. The symbol for the
time will illuminate on the left side and you
can adjust it using the
PLUS
and
MINUS
sensor buttons. To complete the time
adjustment, touch the
MODE
sensor once
again.
The time will only have to be set again if the
appliance is disconnected from the power
supply for a long period of time.
Adjusting the Cooking Time
The cooking time can be adjusted during
“
WAIT
” mode or during “
OPERATING
”
mode.
Adjusting the Minute Minder
Touch the
MODE
sensor until the Minute
Minder symbol illuminates on the Time
display and “
00:00
” appears. Adjust the
desired time period for the warning signal
using the
PLUS
and
MINUS
sensor buttons
while the symbol is flashing. When you
have completed the adjustment, do not
press any buttons for a few seconds, then
the Minute Minder timer will be set.
When the timer reaches zero, an audible
warning will sound, and the Minute Minder
symbol and “
00:00
” will flash on the
Time display. Press any button to stop
the audible warning and the symbol will
disappear.
Adjusting the Cooking Duration Time
This function helps you to cook for a
fixed period of time. Prepare the food
