EN - 17
for cooking and put it in the oven. Then,
select the desired cooking function and
the temperature. Touch the
MODE
sensor
button until you see the Duration Time
symbol on the Time display. Set the
required cooking period using the
PLUS
and
MINUS
sensors while the timer is in
this position. When you have completed
the adjustment, wait until the current time of
day is displayed and until the Duration Time
symbol remains illuminated.
When the timer reaches zero, the oven will
switch off, an audible warning will sound
and the Duration Time symbol will flash on
the Time display. Touch any sensor on the
control unit to end the sound.
Adjusting the Cooking End Time
This function is used to begin cooking
after a certain period of time and for a
specific duration of time. Prepare the food
for cooking and put it in the oven. Then,
select the desired cooking function and the
temperature.
Touch the
MODE
button until you see the
Cooking Duration Time symbol on the Time
display. Set the required cooking period
using the
PLUS
and
MINUS
sensor while
the timer is in this position. When you have
completed the adjustment, wait until the
current time of day is displayed and until
the Cooking Duration Time symbol remains
illuminated.
Then, touch the
MODE
sensor button until
you see the Cooking End Time symbol on
the Time display. The time of day and the
Cooking Duration Time symbol will flash.
Set the required finish time using the
PLUS
and
MINUS
sensors while the timer is in
this position. When you have completed
the adjustment, wait until the current time of
day is displayed and until the Cooking End
Time symbol remains illuminated.
The oven will calculate the operating time
by deducting the cooking period from
the set finishing time, at which it will stop
operating. The timer will give an audible
warning and the Cooking End Time symbol
will flash. Touching any button on the timer
will end the audible warning.
Digital Timer Sound Adjustment
To alter the warning signal sound, while the
Time display shows the time of day, press
and hold the
MINUS
sensor button for 2
seconds until there is an audible signal
sound. After this, each time the
MINUS
sensor is pressed, a different signal will
sound. There are three different types of
signal sound. Select the desired sound
and do not press any other buttons. After a
short time, the selected signal sound will be
saved.
Boost Function
This function is used to shorten the
preheating time. The
BOOST
sensor will
illuminate when the Turbo, Fan, Static
or Pizza functions are selected. To save
preheating time, touch the
BOOST
sensor
button before starting a cooking operation.
Use this function to heat the oven the
desired temperature as quickly as possible.
This mode is not appropriate for cooking.
Key Lock Function
The key lock is used to avoid unintentional
changes to oven settings.
To activate the key lock, touch the
KEY
LOCK
sensor button for 2 seconds until
you see Key Lock symbol on the display.
To deactivate the key lock, touch the
KEY
LOCK
sensor for 2 seconds until the key
lock symbol disappears from the display.
When the key lock is engaged, only the
ON/OFF
sensor button can be activated.
All other buttons will remain locked.
Accessories
The EasyFix Wire Rack
Clean the accessories thoroughly with
warm water, detergent and a soft clean
cloth on first use.
7
5
6
4
3
2
1
T2
T1
• Insert the accessory to the correct
position inside the oven.
• Allow at least a 1 cm space between the
fan cover and accessories.
• Take care removing cookware and/or
accessories out of the oven. Hot meals
or accessories can cause burns.
• The accessories may deform with heat.
Once they have cooled down, they will
recover their original appearance and
performance.
