Silverline AS5323X01, User Manual

Page: 32 / 88

28
If the unit will be connected to a flexible hose, the length of the
hose shall not exceed 120 cm.
Before starting works related to gas installation, please cut the
gas supply.
Make the connection so that no pressure will be applied on the
connection nuts and piping. Make sure that the pipe will not
cause any clogging or contact with the sharp corners.
Note that the gas hose will be TSE stamped, not be laid through
hot areas.
NOTE: Replace the gas hose of your hob at 4 to 5 years
even if it will be undamaged.
NOTE: Check whether any gas leakage after the connection
with soap and water. Do not ever use flame.
Make sure that no additional weight to be applied on the gas
hose.
And apply the following order for installation;
1. In the order; male adaptor cylindrical, gasket, female gas
adaptor, conical-cylindrical or cylindrical cylindrical
components,
2. Tighten connection place with the keys so that the pipes
will be in proper position,
3. Attach C coupling to the main gas source by using hard
copper pipe or flexible steel pipe.
WARNING; Final Check whether any leakage exists at the
pipes with a solution with a soap, and do not ever use flame.