10
GB
Problem
Possible cause
Solution
No function when On/Off Control Panel (22) is operated
No power
Check power supply
Defective On/Off Control Panel
Replace the On/Off Control Panel at an authorised Silverline
service centre
Poor suction power
Blocked air channels
Remove the blockage; follow the instructions provided under
‘Blockage removal’
Vacuum leak
Check hoses for air leaks, prominently found at connectors
and curves. Seal any vacuum leaks to re-establish suction
power
Increased noise coming from dust extractor
Loose fasteners
With the dust extractor switched off and disconnected from
the main power supply, check and tighten all fasteners
Debris in Impeller Housing (21)
Follow instructions under ‘Blockage removal’ to remove the
Impeller Inlet, then remove the obtrusive debris
Troubleshooting
425822_Z1MANPRO1.indd 10
25/08/2016 14:33
