Silverline 25151, Manual

Page: 16 / 24

Pest Control garden System
®
GB
How does Cat & Animal Free 300
™
work?
Cat & Animal Free 300 ™ uses a high-tech high frequency
sound pattern to efficiently scare cats, dogs and small animals from the garden and is controlled by a
motion sensor. Any movement within the guarded area will trigger the repeller to emit high frequency sound
embarrassing to cats, dogs and small animals. The repelling method makes the animals change their
movement pattern so that they will seek for other areas to stay in. The high frequency sound is completely
harmless for all animals and humans.
How far does Cat & Animal Free 300
™
reach? The motion sensor detects all movements up to 15
metres in front of the repeller and automatically activates the repelling.
How should Cat & Animal Free 300
™
be placed? Place it at the same level as the animals’ height, appr.
20-50 cm above the ground, as free as possible directed at the area where the animals stay. Cat & Animal
Free 300
™
should be moved now and then in order to achieve full effect. This creates surprise effects to the
intruder. NOTE! Never direct the repeller against neighbouring lots. For more information see later section.
How should Cat & Animal Free 300 ™ be mounted? Anchor the repeller with the included pole. You can
also hang the repeller on a wall or a fence using the top suspension.
How are the batteries inserted? Unscrew the lid at the bottom of the repeller and insert 6 LR14 batteries
(not included).
How often should the batteries be checked? Normally the batteries would last for at least 4 months.
However they should be checked now and then. Cat & Animal Free 300 ™ can also be connected to a
transformer (not included) specified 12V/DC 500 mA.
How can you tell that Cat & Animal Free 300
™
is working?
When the selection knob is in desired
position the red LED indicator lights up. This means that the repeller is activated and the motion sensor
on. When the motion sensor detects movements and a sound is sent out, the white repelling lamp is also
activated. The sound is on for appr. 10 seconds. The motion sensor is then reset after 5 seconds more.
When can I expect a result?
The animals respond immediately. However a change in their behaviour can
take appr. 2 weeks more. Under certain circumstances it could take more than 2 weeks. During this period it
is wise to move Cat & Animal Free 300
™
in order to increase the moments of surprise.
What is the function of the white repelling lamp?
Cat & Animal Free 300
™
is equipped with a
stroboscopic LED light to increase the repelling at nightfall. If the flashing light irritates people, it can be shut
off using the switch located at the bottom of the repeller.
Is Cat & Animal Free 300
™
harmful to animals? The high frequency repelling sound is completely
harmless to animals.
Does the sound from Cat & Animal Free 300
™
bother the human ear?
When the selection knob is in
one of the positions for small animals, a high frequency sound is emitted which can be audible to humans.
Some people are extra sensible to high frequency sound, and if this is experienced as irritating the selection
knob should be set in another position. You can also change direction of the repeller of Cat & Animal Free
300
™
.NOTE! Never direct the repeller against neighbour lots.
Does Cat & Animal Free 300
™
affect other animals?
Some influence can occur to other animals.
Please carefully read the following instructions
to get the most out of Silverline
®
Cat & Animal Free 300
™
:
• Never direct the unit against neighbour gardens or public areas. The repeller is for private use only, and to
keep wild animals and small animals away from the garden.
• When the selection knob is in position small animals the sound might be perceived by humans. If this is
experienced as irritating, change the position of the selection knob or move the repeller to another place.
• Some influence can occur to other animals. If there are pets in the garden it is recommended to try how
they react before the repeller is set for operation.
• This device withstand rain and snow, but should not be immersed into water.
• Avoid exposing the motion sensor to direct sunlight, since this could shorten the lifetime.