11
GB
6.4 Whisk
Application area:
The whisk is suitable for beating whipped
cream (max. 300 ml), egg whites (max. 4)
and food of a similarly light consistency.
1. Put the cream, egg whites or similar
into the measuring beaker
|
21
or anoth-
er suitable container.
2. Immerse the whisk
|
6
into the cream or
similar.
3. Connect the mains plug
|
3
with the wall
socket.
4. Press the controller
|
2
to switch the de-
vice on and release it to switch off.
5. After whipping remove the mains plug
|
3
and take the whisk
|
6
out of the food.
6. Remove the whisk
|
6
from the whisk
adapter
|
5
.
7. Clean the device immediately if possible.
6.5 Masher
Application area:
The masher
|
23
is suited to mash cooked
fruit or vegetables such as apples, plums,
potatoes or sweet potatoes.
1. Fill food into a suitable container.
2. Place the motor unit
|
1
on the mash-
er
|
23
until it engages.
3. Immerse the masher
|
23
into the food to
be pureed/blended.
4. Connect the mains plug
|
3
with the wall
socket.
5. Press the controller
|
2
to switch the de-
vice on. The speed increases with the
intensity the controller is pressed.
6. Move the hand masher
|
23
up and
down a bit in the food, to ensure that it
is blended evenly.
7. When you are finished, let go of the
controller
|
2
.
8. After the mixing process, wait until the
blade comes to a standstill. Pull out the
mains plug
|
3
and take the masher
|
23
out of the food.
9. Clean the device immediately if possible.
6.6 Chopper
Application area:
The chopper is ideal for chopping meat, Par-
mesan, vegetables, fruit, nuts and herbs.
Preparing food:
•
Rinse or wash the food.
•
Cut the food up into smaller pieces.
•
Remove the outer shell from nuts. You
may use the inner skin if you wish, e.g.
with almonds.
•
Use fresh herbs without stems and in a
dry condition.
•
Remove sinews, bones and gristle from
the meat.
1. Fill the food into the container
|
26
with
blade assembly
|
27
and close it with
the drive cover
|
28
.
2. Place the motor unit
|
1
onto the drive
cover
|
28
until it engages.
3. Connect the mains plug
|
3
with the wall
socket.
4. Press the controller
|
2
to switch the de-
vice on and release it to switch off.
5. After chopping remove the mains
plug
|
3
and remove the motor unit
|
1
from the drive cover
|
28
.
6. Loosen the drive cover
|
28
by turning it an-
ticlockwise.
7. Clean the device immediately if possible.
Summary of Contents for SSMM 600 A1
Page 2: ...English 2 Deutsch 22 ...
