GB
│
IE
│
NI
│
CY
│
17
■
SRR 3.7 C3
NOTE
If...
–
... the shaving result is noticeably poorer, ...
–
... you have to the shave the same spot repeatedly
to achieve a good result, ...
–
... the shave takes much longer than usual, ...
–
... there is visible damage to the shaving heads, ...
... the shaving heads/the cutting unit
must be replaced.
You can order the cutting unit
, incl. shaving heads from
our customer service (see section “Ordering spare parts”).
To replace the cutting unit
proceed as follows:
1) Take hold of the cutting unit
with three fingers in the
grip recesses
and pull it off.
2) Fit the new cutting unit
onto the shaver. Ensure that it
snaps into place and is seated firmly.
Travel lock
This appliance is fitted with a travel lock. You can lock the On/Off
switch
to prevent accidental starting:
Press and hold the On/Off switch
for around 3 seconds, until
the symbol
lights up blue. The On/Off switch
is now
locked.
To unlock the appliance, press and hold the On/Off switch
for around 3 seconds, until the symbol
lights up blue five times.
NOTE
If you attempt to switch the appliance on while the travel lock
is activated, the symbol
lights up blue once.
The appliance will not start.
