■
14
│
GB
│
IE
│
NI
│
CY
SRR 3.7 C3
2) Tap the cutting unit
on a flat surface or blow off the hair
cuttings.
3) Use the brush
!
to remove any remaining hair cuttings.
4) Replace the cutting unit
flush on the appliance. Ensure that it
snaps into place and is seated firmly.
Long hair trimmer
■
Clean the long hair trimmer
after every use with the supplied
brush
!
.
■
Oil the long hair trimmer
around every 6 months with a drop
of sewing machine oil.
Cleaning under running water
1) Take hold of the cutting unit
with three fingers in the grip
recesses
and pull it off.
2) Hold the cutting unit
under the running water so that the water
flows through the shaving heads from the inside to the outside.
CAUTION! MATERIAL DAMAGE!
Hold only the cutting unit
under running water! The shaver
handset can be damaged irreparably if it is held under running
water.
3) Allow the cutting unit
to dry.
4) Replace the cutting unit
flush on the appliance. Ensure that it
snaps into place and is seated firmly.
Thorough cleaning
To clean the appliance thoroughly, disassemble the three cutting
heads:
1) Take hold of the cutting unit
with three fingers in the grip
recesses
and pull it off:
