■
16
│
GB
│
IE
│
NI
│
CY
SRR 3.7 C3
3) Clean all parts under running water and then allow them to dry fully.
4) Reassemble the cutting unit
. Use the following illustrations for
guidance:
–
Place the three shaving heads in the recesses of the cutting
unit
. Ensure that the notches on the edge of the shaving
heads rest on the catches in the opening.
–
Place the round blades into the shaving heads with the blade
tips to the front.
–
Press the two tabs of the retainers together and place them
back into the catches of the cutting unit
and release the tabs.
The cutting unit
is now reassembled.
5) Remove loose hairs from the shaver with the brush
!
.
6) Replace the cutting unit
on the shaver. Ensure that it snaps
into place and is seated firmly.
■
Clean the housing with a moist cloth.
