GB 16
Charging mobile devices with the power
bank
You can charge up to three devices at the same time using the
power bank
8
. If all outputs are used at the same time, the sum of
the output current must not exceed 3 A.
Connect the USB cable
9
or the original charging cable of
the device to be charged to the USB output
2
. Then connect
Micro-USB port of the USB Cable
9
to the Micro-USB input
of device to be charged. The charging process will start
automatically.
If your mobile device has a USB type C input, you can use a
type C to type C connection cable (not included) to connect
your device’s type C input to this power bank’s USB Type C
output
3
. The charging process will start automatically.
At the same time, you can place the device to be charged on the
Qi charging surface
7
.
In case if the charging process does not begin immediately,
press the ON / OFF button
5
briefly to begin the charging
process. The current battery status of the power bank
8
is
displayed during the charging process by the battery status
indicator
6
.
To end the charging process, disconnect the USB charging cable
from the mobile device and the power bank
8
. The power
bank will switch OFF and battery status indicator
6
will switch
off after approx. 30 seconds.
Or simply double click the ON / OFF button
5
. The power
bank
8
will switch off.
NOTE:
If you use both USB ports, a voltage of 5 V will be output at both
outputs. The maximum output current must not exceed 3 A for both
outputs.
Summary of Contents for SQWP8000 1A1
Page 4: ...A 9 ...
