GB 15
1 LED lights up
=
25 %
2 LEDs lights up
=
50 %
3 LEDs lights up
=
75 %
4 LEDs lights up
=
100 %
Qi wireless charging
Put your Qi compatible device to be charged on the centre of
the Qi charging surface
7
of the power bank
8
.
Charging starts automatically when the Powerbank is switched
on. When Qi charging is active, Qi status indicator
4
lights
green.
Slightly adjust the charging position of the device to be charged
so that its charging surface is facing down to the centre of the Qi
charging surface
7
of the power bank
8
.
If wireless charging does not start, move your device to be
charged more accurately to the centre of the Qi charging
surface
7
.
While in idle status (standby mode), the Qi status indicator
4
will illuminate amber in colour.
When the charging process has finished the Qi status indicator
4
will still illuminate green in colour*.
The Qi status indicator
4
also shows quick flashing when the
power bank cannot detect any Qi charging device on the Qi
charging surface
7
. In this case, move your Qi compatible
device to be charged towards the center of Qi charging surface
7
in order to start wireless charging.
*
NOTE:
1) Qi status indicator
4
may change back to amber colour
(standby mode) when wireless charging has finished if the
mobile device closed the wireless communication between the
Qi charging surface
7
and the mobile device.
2) All devices to be charged must be comply with Qi Standard.
Summary of Contents for SQWP8000 1A1
Page 4: ...A 9 ...
