GB 14
If you use a USB power supply, the socket used must always be
easily accessible so that the USB power supply can be quickly
removed from the socket in the case of emergency. Please also
refer to the manufacturer‘s instruction manual.
ATTENTION
Two Qi charging devices and/or power banks
must never be placed on top of each other with the charging
surface. A device defect is the possible consequence.
P
Operation and use
Charging the power bank
The built-in rechargeable battery must be fully charged before using
the product.
To charge the power bank
8
only use power supplies with an
output voltage of 5 V and an output current of at least 3 A.
ATTENTION
The power bank must not be charged from a
PC or notebook.
Connect the USB cable
9
with the Micro-USB input port
1
of
the power bank
8
.
Connect the other end of the USB cable
9
(USB Type A) to a
USB power supply (not included in the scope of delivery) (see
fig. A).
ATTENTION
Do not connect any device to the Powerbank for
charging while the Powerbank itself is charging.
Checking the battery status
You can check the battery status on the battery status indicator
6
of the power bank
8
at anytime.
Briefly press the ON / OFF button
5
. The battery status
indicator
6
shows the approximate charge status of the internal
battery in percent for approx. 30 seconds.
Summary of Contents for SQWP8000 1A1
Page 4: ...A 9 ...
