9
2 Unpacking and assembling
GB
IE
2
Unpacking and assembling
2.1
Unpacking
1.
Unpack the appliance and all its accessories.
2.
Check the contents for completeness and possible
damage. Information regarding scope of delivery
Z
page 4, "Overview"
.
2.2
Assembly
1.
Insert the end of the hose with the release catch (Fig. 2/
1) upwards into the opening until you hear and feel the
catch engaging.
2.
Insert the handle (Fig. 3/1) into the upper end of the tel-
escopic tube (Fig. 3/3).
3.
Attach the floor nozzle (Fig. 3/4) to the bottom end of
the telescopic tube (Fig. 3/5).
4.
Adjust the length of the telescopic tube. Press down the
release latch on the tube to (Fig. 4) do this. Then extend
the telescopic tube to the desired length. Let go of the
release catch while pulling until it locks in place. You will
hear a distinct click.
Your vacuum cleaner is now ready for use.
NOTE:
Immediately contact your dealer if you have found dam-
age resulting from transport.
ATTENTION:
Always transport or ship the appliance in its original
packaging to avoid damage. Keep the packaging for
such an event.
Dispose of no longer needed packaging material accord-
ing to the applicable regulations of your country.
WARNING:
Danger of injury! Only assemble the appliance if it is not
connected to the power supply. Otherwise the machine
might start up and parts of your body, hair or pieces of
clothing might be sucked in.
NOTE:
Depending upon your height, you might find it helpful to
use the tube extension (Fig. 3/2) between the handle
(Fig. 3/1) and the telescopic tube (Fig. 3/3).
NOTE:
It might be necessary to press a bit harder or to twist the
two parts against each other when putting them together
in order to firmly join them.
2
3
4
66492_Silvercrest_Multicyclone-Bodenstaubsauger_SMZS_1600_A1__GB_FI_SE_DK_DE.pdf 8
20.05.2011 10:17:14
Summary of Contents for SMZS 1600 A1
Page 3: ...3 D 1 ...
