GB
│
IE
│
NI
│
41
■
SMW 900 EDS C6
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTIONS
"E03" appears on the
display
1
and you hear
beeps .
The microwave has switched
into fault protection due to
a short circuit or open-circuit
voltage .
Stop the programme and re-
move the power plug . If pos-
sible, eliminate the problem,
e .g . metals in the cooking
area, which can lead to the
above problem when using
the microwave function .
Otherwise, please contact
our Customer Support .
The light inside the micro-
wave is not working .
The light bulb is possibly
defective .
Contact the Customer Ser-
vice department .
RISK OF INJURY!
►
Never try replace the light bulb yourself . Opening the appliance housing
could cause the release of microwave energy .
Disposal
Do not dispose of the appliance in your normal domestic waste .
This product is subject to the provisions of European Directive
2012/19/EU .
Dispose of the appliance via an approved waste disposal company or your
municipal waste disposal facility .
Please comply with all applicable regulations .
Please contact your waste disposal facility if you are in any doubt .
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product .
Dispose of all packaging materials in an environmentally friendly manner .
Dispose of the packaging in an environmentally friendly manner .
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary . The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics, 20–22: Paper and cardboard, 80–98: Composites
Summary of Contents for SMW 900 EDS C6
Page 3: ...A B C ...
Page 47: ... 44 GB IE NI SMW 900 EDS C6 ...
