■
40
│
GB
│
IE
│
NI
SMW 900 EDS C6
Troubleshooting
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTIONS
There is nothing on the
display
1
.
The plug is not inserted into
a mains power socket .
Check the plug .
The mains power socket is
defective .
Try another mains power
socket .
The display
1
is defective .
Contact Customer Service .
The appliance does not
respond to pressing the
buttons .
The child safety lock is
activated .
Deactivate the child safety
lock (see section "Opera-
tion") .
The appliance does not
start the cooking/heating
process .
The door is not properly
closed .
Close the door properly .
The turntable
4
makes a
loud noise when turning .
The turntable
4
is not cor-
rectly positioned on the axle .
Insert the turntable
4
cor-
rectly into the cooking area .
The small rollers
5
and/or
the floor of the cooking area
are unclean .
Clean the rollers
5
and the
floor of the cooking area .
"E01" appears on the
display
1
and you hear
beeps .
The microwave has over-
heated .
Terminate the current pro-
gramme immediately .
Remove the plug from the
mains power socket, open
the microwave door and
allow the appliance to cool
down .
"E02" appears on the
display
1
and you hear
beeps .
There is a sensor error .
Stop the programme and let
the appliance cool down .
Then restart the microwave .
If the error occurs again,
contact Customer Support .
There is an error during the
heating up of the appliance .
Stop the programme and let
the appliance cool down .
Then restart the microwave .
If the error occurs again,
contact Customer Support .
Summary of Contents for SMW 900 EDS C6
Page 3: ...A B C ...
Page 47: ... 44 GB IE NI SMW 900 EDS C6 ...