Silvercrest SLSN 3 A1, Operating Instructions And Safety Instructions

Page: 34 / 148

SilverCrest SLSN 3 A1
32 - English
8.2 Shaving
Before a dry shave, ensure that the skin is clean, dry, and clear of any cream.

Pull the protective cover (1) upwards.

No attachment (10, 11, 12) is used when in shave mode.

Slide the ON/OFF switch (7) towards the shaving foil (2) while pressing the travel safety lock (8). The
lady shaver will now start.

Hold the lady shaver at a right angle to your skin and, in straight lines, run the shaving foil (2) against
the direction of hair growth.

Once you have finished shaving, push the ON/OFF switch (7) back into its original position. The lady
shaver will now stop.

We recommend cleaning the lady shaver with the cleaning brush (14) after every shave. For details
on how to clean the lady shaver more thoroughly, please refer to section ‘9. Cleaning/maintenance’.
The lady shaver is also suitable for use in the shower, but do not immerse the device under
water, as this may result in irreparable damage.
8.3 Shaving with the trimmer (3)
If you haven’t shaved in a while and the hair is slightly longer, e.g., on your legs, use the trimmer (3). Then
shave the corresponding areas of the skin as described in section ‘8.
2
Shaving’. To use the trimmer (3),
proceed as follows:

Pull the protective cover (1) upwards.

No attachment (10, 11, 12) is used when in trimmer mode.

Push the trimmer locking mechanism (4) towards the shaving foil (2). The trimmer (3) is now
secure
&
. This position is recommended if precise lines or contours are to be shaved, e.g., to style
the bikini line are. Always ensure that the skin is taut in order to avoid injury.

Slide the ON/OFF switch (7) towards the shaving foil (2) while pressing the travel safety lock (8). The
lady shaver will now start.