Silvercrest SLSN 3 A1, Operating Instructions And Safety Instructions

Page: 37 / 148

SilverCrest SLSN 3 A1
English - 35

Place the glide cap (10) onto the lady shaver from the top and push it downwards until you hear it
click into place. When putting on the attachment, ensure that the recess for the trimmer locking
mechanism (4) is on the right-hand side.

Push the trimmer locking mechanism (4) towards the ON/OFF switch (7). In this position
'
, the
trimmer (3) will move with the glide cap (10) during the shave.

Slide the ON/OFF switch (7) towards the shaving foil (2) while pressing the travel safety lock (8). The
lady shaver will now start.

Hold the lady shaver at a right angle to your skin and, in straight lines, run it against the direction of
hair growth.

Once you have finished shaving, push the ON/OFF switch (7) back into its original position. The lady
shaver will now stop.

We recommend using the cleaning brush (14) to clean the lady shaver and attachment (10) after
every shave. For details on how to clean the lady shaver more thoroughly, please refer to section ‘9.
Cleaning/maintenance’.
8.7 After shaving
Immediately after shaving, avoid using substances that can cause skin irritation, e.g.,
deodorants containing alcohol.
However, it is perfectly fine to apply a little cream or body lotion.
9. Cleaning/maintenance
9.1 Cleaning

Remove the protective cover (1) or attachment (10, 11, 12), if fitted. The protective cover (1) and
attachments (10, 11, 12) can be cleaned using soapy water. Then dry it well.

The housing of the lady shaver can be wiped using a slightly damp cloth; never use any aggressive
cleaning agents.

Remove any remaining hair from the shaver head (6) using the cleaning brush.